The AG26, AG52, and AG53 Asset Gateways (AG) offer many configurations to physically connect to reefers. Currently, Samsara supports two reefer manufacturers, Carrier and Thermo King:
The AG52 and AG53 are compatible with most Thermo King models. To confirm compatibility, see the Compatibility Reference Guide. For all installation types, you will need the CBL-AG-BRTK cable (Install Guide).
When you are are ready to install your AG52/AG53, see AG52/AG53 Thermo King Reefer Installation.
To install an AG26 on a Thermo King reefer, you will need either the 1-cable or 2-cable CBL-AG-ARTK configuration:
-
CBL-AG-ARTK 1-cable configuration (Install Guide)
-
CBL-AG-ARTK 2-cable configuration (Install Guide)
This cable draws power from both the 7-way power connection and the reefer unit and is compatible the Thermo King models listed below. When reviewing the Thermo King reefer compatibility, consider the controller board used in the refrigeration unit. For more information, reference the Trailer Model Compatibility Reference Guide (PDF).
Currently, the AG26 supports the following years and models with the following controller board generations:
|
Model |
Year |
Board |
|---|---|---|
|
SB-110 |
2005-2011 |
SR-2 & HMI |
|
SB-110 |
2005-2011 |
SR-2 Multi-Temp & HMI |
|
SB-210 |
2005-2011 |
SR-2 & HMI |
|
SB-210 |
2005-2011 |
SR-2 Multi-Temp & HMI |
|
SB-310 |
2005-2011 |
SR-2 & HMI |
|
SB-310 |
2005-2011 |
SR-2 Multi-Temp & HMI |
|
SL-400E |
2005-2011 |
SR-2 Multi-Temp & HMI |
|
SB-130 |
2005-2011 |
SR-3 & HMI |
|
SB-130 |
2005-2011 |
SR-3 Multi-Temp & HMI |
|
SB-230 |
2005-2011 |
SR-3 & HMI |
|
SB-230 |
2005-2011 |
SR-3 Multi-Temp & HMI |
|
SB-330 |
2005-2011 |
SR-3 & HMI |
|
SB-330 |
2005-2011 |
SR-3 Multi-Temp & HMI |
|
C-600 |
2010-Present |
SR-4 & HMI |
|
S-600 |
2010-Present |
SR-4 & HMI |
|
S-700 |
2010-Present |
SR-4 & HMI |
|
C-600M |
2010-Present |
SR-4 Multi-Temp & HMI |
|
S-600M |
2010-Present |
SR-4 Multi-Temp & HMI |
|
S-610M |
2010-Present |
SR-4 Multi-Temp & HMI |
|
S-600DE |
2010-Present |
SR-4 Multi-Temp & HMI |
|
S-610DE |
2010-Present |
SR-4 Multi-Temp & HMI |
For an AG26 Carrier installation, current model coverage includes X4 and Vector 8xxx models. The X4 models require the CBL-AG-ARCR-X4 cable that connects directly into the reefer unit. Vector 8xxx models require the CBL-AG-ARCR-VT cable. Use the following table to determine the appropriate cable for your Carrier reefer:
|
Model |
Year |
Cable |
|---|---|---|
|
X4 |
2013-Present |
CBL-AG-ARCR-X4 |
|
Vector 8xxx |
2013-Present |
CBL-AG-ARCR-VT |
After you identify the cable for your configuration, proceed to AG26 Carrier Reefer Installation for full installation instructions.
Comments
0 comments
Please sign in to leave a comment.