Reefer Temperature Report

After you install the AG26 for a Reefer Integration, you can use the Reefer Report to monitor the reefer average, real-time, and historical temperature data, such as discharge air, ambient air, and reefer mode.

The Reefer Report provides a real-time overview of all reefers in your fleet. The report lists the following data for each asset:

Field	Description
Mode Icon	Start/Stop Reefer Mode ( ) Continuous Reefer Mode ( ) Normal operation displays green. Reefers with alarms display red.
Asset	Asset name
Location	Last asset check-in location
Set Point	Reefer target temperature setting
Ambient	External environment temperature
Return	Return air temperature
Discharge	Supply air temperature

To view the Reefer Report for your fleet, perform the following workflow:

1. From the Samsara dashboard, select Reports ( ) > Assets > Reefer Temperatures.

2. Select an asset to view the Reefer Report for the asset.

   The asset Reefer Report graphs all sensor and temperature data for the reefer during the selected time period. By default, the report displays reading data at 15 minute intervals. To view more detailed data, select an alternate data interval (Every minute, Every 5 minutes, Every 10 minutes).

   

   In addition to the data fields from the Reefer Report overview, the asset detail also provides the following fields:

   Field	Description
   Time	The date and time of the reading
   EM data	(Sensor required) Temperature from Environmental Monitoring (EM) sensor.
   Cargo	(Sensor required) Cargo status. Report displays Full or Empty