VG55 Mounting Bracket (ACC-VG-DMB) Installation Guide

Use this guide to install the mounting bracket for the Vehicle Gateway model VG55.

What's Included

	Quantity	Item
	1	Mounting bracket
	4	Mounting screws
	2	Zip ties

Install the Mounting Bracket

1. Use the provided screws or zip ties to secure the mounting bracket to a stable location.

   

2. Snap the VG onto the mounting bracket.

   

3. Continue with the installation process by inserting the 16-pin connector on the VG cable that you have ordered.

   

Important Safety and Use Information

This installation guide contains typical information specific to products manufactured at the time of its publication. The contents of this guide do not constitute a warranty and are for reference only.

Do not attempt to repair this product, use any third party replacement parts with this product, or otherwise modify this product except in accordance with product manuals or as otherwise instructed by Samsara. Failure to do so may cause property damage, lead to physical injury, or void your product warranty.

Any installation not in accordance with the instructions in the installation guide or otherwise in the Documentation may result in physical injury or property damage.

Do not use this product other than as described by the relevant IP rating or recommended operating conditions. Damage or injury may result.

This hardware and any associated software may not be compatible with third party products and/or services. This hardware and associated software may interact, interface, or integrate with third party products and/or services and may not be validated or supported by such third parties and may interfere with the operations of or void warranties for such third party products and/or services.

Failure to follow mounting instructions may create risk of physical injury or property damage from falling objects.

If mounting the hardware to a building wall, check for wiring or plumbing before drilling any holes.